Coolpex Portable Drinking Water System Model #CW-50T
 
   
  Function & Feature
   
 
The Coolpex Portable Water device is very compact. The botle can be separated from the device easily using patented "Cap-style" design.The device will automatically stop generating pure water when the bottle is full.

One Coolpex Portable Water device can generate 20 bottles of drinking water per day. the volume of the bottle is 2.5 gallons which suitable to carry for outdoor use.
   
 
       
The "big cap" design of the bottle makes user clean the tank quickly and easily. there is bo worry about second pollution.

the bottle can be installed into any dispenser by using a funnel on it.It saves money instead of buying bottle water.
 
   
 
CW-CTO
CW-T33
CW-P5
Activated
Granular
5 Micron
Carbon black
Activated
Sediment
Pre-Filter
Carbon Filter
Pre-Filter
   
 
 
Specificatuons
Feed water pressure 5psi Cperating pressure 45~100psi
Feed water temperature 40°F~80°F Feed water PH range 40~11.0
Percent Recovery(Average) 25~30% Percent Rejection 85~95%
R.O membrance Thin film composite    
 
MODEL
PRODUCTION (GPD)
MACHINE DIMENSION(CM)
BOOSTER PUMP TRANSFORMER
PRESSURE PSI
TANK(G)
CW-50T
50
W49XH51XD35
24vdc
65~100psi
2.5
CW-75T
70
W49XH51XD35
24vdc
65~100psi
2.5

CW-ACC
(Accessory
)

CW-01T=1+2+3
 
CW-02T=1+2
CW-03T=1+4
 

Model #CW-50C
   
  Standard Features:
  *10" 5 micron P.P
*10" GAC filter
*10" 1 micron P.P
* RO membrane
* Post carbon
* Booster pump
* Storage Tank Inside (2.2 G)
* High & Low pressure switches
* Equipped with FC3 faucet
* Dimension: 55 x 34 x 46 cm
   
   

Model #CW-50U
   
  Standard Features:
  * 10" 5 micron P.P
* 10" GAC filter
* 10" 1 micron P.P
* RO membrane
* Post carbon

* Booster Pump
* Storage Tank Inside (3.2 G)
* High & Low pressure switches
   
Zoom in
   

Easy Drain Saddle Model #EDS-25

Note :Apply tube size 1/4" & G-45 fitting.
* all parts design eliminates corrosion
* Maxtec G-45 Fitting for quick installation
* High chemical resistance

 
 
 
 
Step 1:
Drill a 1/4" hole on the pipe. Attach the bench mark into the hole..
  Step 2:
Buckle up the strap and tighten it up..
Step 3:
Turn the blue gripper not to match the notches.Insert the tube to the fitting to all the end until it stops.